Arygon

From NFC Tools
Jump to: navigation, search

Contents

General

For all ARYGON MCU-equipped the default baudrate is always 9600 baud as this is set by the MCU firmware. If the host bus is USB, the MCU is connected to SiLabs UART-USB bridge.

For devices without MCU the default baudrate of PN532 based products is 115200 baud, for PN531 based it is 9600 baud. If the host bus is USB, a SiLabs UART-USB bridge is directly connected to PN53x chip.

APDB2UA33

This device is an OEM-only product, that means this device comes without enclosure and is designed to be embedded in the targetted application.

dscf909999.jpg dscf1039new.jpg

Theses devices are PN532-equipped with a front MCU connected by UART to host.

Internal parts references

  • PIC18LF6621 64/80-Pin High-Performance, 64-Kbyte Enhanced Flash, Microcontrollers with A/D,
  • PN532/104 or PN5321A3HN/C106 NXP NFC chip.

Note: A bootloader is installed in the MCU and firmware updates are allowed.

External links

Personal tools
Namespaces

Variants
Actions
Navigation
Documentation
Misc
Toolbox
Partners